32'' Tall Castle Metal Raised Garden Beds

For example, '6-in-1' means there are six possible configurations for metal garden beds. You can assemble six different shapes using the included corner and side panels. With these panels, you can unleash your creativity to build raised beds of various sizes and shapes.

VEGEGA is one of the few manufacturers that construct metal raised garden beds from Zn-Al-Mg stainless steel (Zinc-Aluminum-Magnesium). Metal garden beds made from this material can last up to 20 years.

Decomposing galvanized steel garden beds with a Zn-Al-Mg Stainless Steel alloy coating requires a very high level of acidity.

The neutral soil in which the crops are grown will not have any effect on the coating. Neither the metal nor the coating itself will leach any harmful substances into the soil.

No, the beds don't have bottoms. This design allows excess water to drain, preventing root rot, and also permits worms to access the bed.

By using bottomless beds, you enable plant roots to reach the nutrients below the ground.

No, they won't. This is thanks to the excellent reflectivity of the galvanized steel, which prevents most of the heat from entering the soil.

As a result, the soil inside the bed can rapidly absorb and dissipate heat from the stainless steel edges. Our elevated garden beds excel at maintaining a consistent and cool soil temperature.

VEGEGA uses extra strength 0.6mm thick Zn-Al-Mg stainless-coated steel sheets. This heavy-duty material is robust enough to support soil for decades and has a lifespan of 4-7 times longer than wooden or plastic beds.

The metal garden bed doesn't require any extra maintenance in the winter and can withstand temperatures as low as -76°F.

No, Vegega metal garden beds do not come with, nor do they require, a bottom. This design ensures better drainage and air permeability.

Yes, it's possible. We recommend using a 17-inch or taller metal garden bed, which provides ample soil depth for plant roots to grow freely and ensures efficient drainage.

For shorter garden beds, you can consider using landscaping fabric to minimize soil run-off when watering.

To demonstrate that our metal garden beds won't harm plant roots in hot summer conditions, we invited internet celebrities and customers to conduct a test and create a video. You can watch the test video by clicking here, and read the accompanying article.

While the paint surface helps prevent rust, the primary rust prevention layer is the Zn-Al-Mg plating layer beneath the paint. Even if the paint gets scratched, it maintains high rust resistance.

Yes, you can start a raised garden bed almost anywhere, whether it's on concrete or in a corner of your garden. Just make sure it's located in a spot that receives plenty of sunlight.

Additionally, you can enhance drainage by placing the outer packing carton at the bottom of the raised garden bed.

Yes, you can do this, especially in 32-inch tall garden beds or in areas of the yard with poor drainage. Placing crushed rock or pea gravel at the bottom of a raised bed can effectively improve drainage and air circulation.

Since soil tends to settle and become compacted over time, having rock at the bottom of the bed provides space for excess water to drain away from plant roots.

It depends on the size and shapes you select, and specific instructions may be found in the configuration section of each product page

Landscape fabric is not a necessity. For 8 inches of metal garden beds, it can minimize soil erosion when watering.

Higher beds, like 11, 17, and 32-inch beds, do not have these worries due to the varying height structures. But if you want to keep your place clear or control weeds, that is an option.

Absolutely, you can! This technique is particularly beneficial for garden beds that are 32 inches tall or when dealing with poor drainage areas of your yard.

Placing crushed rock or pea gravel at the bottom of your raised bed is a smart strategy. It enhances drainage and promotes better air circulation.

Given that soil tends to settle and compact over time, this layer of rock at the bed's bottom ensures that excess water can effectively drain away from your plants' roots.

1. Inside the bed.

2. As illustrated in the pictures.

We recommend layering your garden bed with cardboard, branches, and wood chips at the bottom, composting kitchen waste in the middle, and topping it off with fluffy soil for optimal drainage, nutrients, and cost savings.

It's also safe to use our metal raised beds without rubber edging. We've already ensured they're not sharp to the touch by rounding their edges during manufacturing.

Adding rubber edging not only enhances safety but also enhances the aesthetic appeal of the metal raised beds. Therefore, we recommend installing rubber strips.

Since metal raised garden beds are relatively heavy, some damage may be caused during transportation. For example, impacts may lead to bending in the corners. Although we take great care to package our garden beds before shipping, occasional damage may still occur.

If you open the shipping box and find that the garden bed is damaged or crushed, please retain the shipping box, take photographs of the damaged areas, and send them to our customer service email at support@vegega.com.

Upon receiving your email, we will assist you in dealing with the issues. If the damage is serious, we will provide a free return or exchange service.

If the return is not due to product issues, such as damage, incorrect items, or missing accessories, but rather for personal reasons, we will accept returns as long as the buyer keeps the original packaging undamaged and it does not affect the resale of the product.

To initiate a return, please contact our customer service at support@vegega.com for return instructions. We will provide you with a return address.

Kindly note that the buyer is responsible for the return shipping charges. Once you've shipped the item back, please provide us with the tracking number. Upon receiving the return, we will issue a full refund.

In the United States (excluding Hawaii and Alaska), all products are free shipping. We can also ship to other countries around the world, but there is an additional shipping charge. Please feel free to reach out to our customer service for a shipping quote.

In the United States (excluding Hawaii and Alaska), in-stock products typically arrive within 5 days. For pre-order products, they will be shipped according to the specified time on the product page and delivered within 5 working days after shipment.

You can contact us in four ways:

1. Email: This is our email address: support@vegega.com. We will respond to your email within 24 hours on working days, excluding weekends and holidays.

2. Call: This is our customer support phone number: +1 347-462-0771. We are available from 21:00 to 22:30 Eastern Time on weekdays, excluding weekends and holidays.

3. Online Message: You can leave us a message on our website. A round contact button is located on the right side of every page. If our customer service staff is online, we will reply to your question promptly; if not, we will reply via email within 24 hours on weekdays, excluding weekends and holidays.

4. Social Media: We have official accounts on Instagram and Facebook. You can follow us and send us a message there. We will provide a quick response on weekdays, excluding weekends and holidays.

Some products may require shipment from the factory, which may take up to ten days for preparation and handover to UPS or FedEx.

During this period, tracking numbers are unavailable. If you have questions about the shipment process, please contact our customer service.